Low Loader Hire in Birmingham

Road Haulage Birmingham offers Low Loader Hire and other solutions to those in Birmingham and around the surrounding areas.

• Versatile
• Precise
• Dependable

Low Loader Hire in Birmingham

Our low loader hire in Birmingham is driver-operated: one of our drivers arrives with the tractor unit and trailer, loads your machine, straps and chains it, and delivers it to the next site. There is no self-drive option, and that is deliberate. The person moving a 20 tonne excavator across the West Midlands should be someone who chains plant down for a living, not someone collecting keys from a depot at seven in the morning.

Contractors, plant hire companies, recycling yards, manufacturers and farmers across Birmingham, the Black Country and the wider Midlands use us when a machine is too tall, too heavy or too awkward for an ordinary flatbed. Like every goods vehicle movement, our work sits under the goods vehicle operator licensing regime, so your load travels on a licensed vehicle with a qualified driver.

How driver-operated low loader hire works

The process is simple from your side. You give us the machine details and the two addresses. We work out which trailer will carry it legally and safely, check the route, and book the vehicle and driver for your date. On the day, the driver takes charge of loading and securing, travels the planned route and unloads at the delivery point. If the load needs notice given to the police or highway authorities, we send it in advance.

We quote for the movement as a whole, from collection to delivery, so you know the cost of the job before you book it.

Typical low loader loads around Birmingham

• Excavators, from compact machines up to large tracked diggers
• Bulldozers, crawler loaders and soil compactors
• Crushers and screeners for recycling and quarry work
• Mobile cranes and piling equipment
• Scissor lifts and boom lifts too tall for a standard plant lorry
• Large tractors, sprayers and other farm machinery

Some machinery does not need a low deck at all. For items that travel well within normal height and weight on a flatbed or curtainsider, our plant machinery transport in Birmingham is usually quicker to arrange and cheaper.

Matching the trailer to the machine

Three things decide the trailer: travelling height, weight and length. A step-frame low loader suits most plant up to a moderate height. A low bed drops the deck further for tall items such as crushers. An extending trailer handles long loads like boom sections or steel. We also look at track width against deck width, whether the machine can climb the ramps, and where the tie-down points are. Getting this right at quote stage avoids a second vehicle being sent on the day.

Wide, heavy and oversize low loader moves

Once a load passes 3 metres wide or the combination goes over 44 tonnes, it is no longer a standard movement. Notice periods apply, escorts may be needed and the route has to be planned around structures that can take the weight. Our abnormal load transport in Birmingham deals with the wide and oversize side of that, and our heavy haulage service covers loads where weight is the main concern.

Getting your site ready for the low loader

A low loader with its tractor unit can be well over 16 metres long, so the first question is whether it can get in, turn and get out again. Tell us about gates, overhead cables, soft ground and any height barriers on the way in. If the vehicle cannot reach the machine, we can usually agree a loading point on firm ground nearby. Fuel the machine, remove loose buckets or attachments that can travel separately, and make sure the keys and an operator are on hand if it is driving onto the trailer. A few minutes of preparation saves a lot of waiting.

Where we work

We send low loaders across Birmingham, Solihull, Wolverhampton, Walsall, Dudley, West Bromwich, Sutton Coldfield, Tamworth, Lichfield and Redditch, and on to sites throughout the UK. Plant going off hire, machines heading to auction and kit moving between regional depots are all regular runs for us.

Reasons to book with us

• Every hire comes with a driver who loads, secures and delivers
• No guesswork on trailers: we size the vehicle from your measurements
• Routes checked for low bridges, weak structures and restricted roads
• Police and authority notices sent when the movement requires them
• Clear prices quoted per job

Relocating equipment between factory units rather than plant between sites? Our machinery movers in Birmingham look after that kind of move.

Frequently asked questions

Do you offer self-drive low loader hire?

No. Every low loader we supply comes with one of our own drivers. You do not need an operator licence or a category C+E licence to use the service.

How much notice do you need?

For standard loads, a few working days is normally enough. Where police or highway authority notice is required, allow at least two clear working days for that on top, and longer for the heaviest categories.

Can you move a machine that does not run?

Often, yes, but it changes how it gets onto the trailer. A non-running machine may need winching or lifting on. Tell us when you enquire so we can plan the right method and equipment.

How high can the load be?

There is no fixed legal height limit for lorries in the UK, but many bridges around the West Midlands are lower than 5 metres. We check your load's travelling height against every structure on the route before we confirm.

What should I send with my enquiry?

The machine's weight and its height, width and length, both addresses, the date and any access limits on site. A photo and the model number make it quicker.

Get a low loader quote in Birmingham

Send the machine details, collection and delivery addresses and your preferred date. We will confirm the trailer we would use and give you a price for the job. Call us or use the contact form.